TEST MODE

• Set-up:

  Put the “Mode” switch in the Test position.

•  

•  

  Function:

  • The light turns on for only 5 seconds during daytime or night once it detects motion.
  • This mode is used for checking whether the sensor is working properly.
  • Test Mode can work during the daytime and night. Except for Range, the Lux and Time Setting doesn’t work while using this mode

           AUTO MODE

Motion Sensor

• Set-up:

  Put the “Mode” switch in the Auto position.

   

•  

• Function:

   

  • When the sensor detects motion, it lights up for 1-10 minutes according to the time it has been set.
  •  
  • Auto Mode only works at night. When it’s bright (> 100-150 LUX) around the sensor, the light goes automatically back to Auto Mode

• While using the auto mode, the toggle switches off and 2 seconds later on again. The light turns on continuously for ca. 8 hrs and goes off in the daytime.

          ON-TIME MODE

Set-up:

Put the “Mode” switch in the On-Time position.

Function:

• Light can work as a standard LED light without motion sensing.
• The light turns on when switched on, and turns off when switch off.
• On-Time Mode can work during the daytime and night. The Lux, Time, and Range Setting doesn’t work while using this mode

 DUSK TO DAWN MODE

• Set-up:

  Put the “Mode” switch in the D2D position.

  Function:

   

  • The light turns on automatically at dusk or night and turns off at dawn or if it’s too bright for your sensor.
  • D2D Mode only works at night. When it’s bright around the sensor, it goes off automatically. Just r Lux Work
  •  LUX(Recommend to set LUX to 12 o’clock pos
  •  
  • Time and Range don’t work while using this mode.